Fatigue Fracture Research Articles

Experimental Study on the Fatigue Crack Propagation Rate of 925A Steel for a Ship Rudder System

The low-temperature fatigue crack propagation rate of 925A steel, as a rudder steel for polar special ships, has a crucial impact on the evaluation of the fatigue strength of polar ships. The purpose of this article is to study the fatigue crack propagation rate of 925A steel under different low-temperature conditions from room temperature (RT) to −60 °C. The material was subjected to fatigue crack propagation tests and stress intensity factor tests. The experimental tests were conducted according to the Chinese Standard of GB/T6398-2017. The results show that as the temperature decreases, the lifespan of 925A increases. Within a certain stress intensity factor, as the temperature decreases, the fatigue crack propagation rate decreases. At −60 °C, it exhibits ductile fracture; within normal polar temperatures, it can be determined that 925A meets the requirements for low-temperature fatigue crack propagation rates in polar regions. However, in some extreme polar temperatures below −60 °C, preventing brittle failure becomes a key focus of fatigue design. Finally, the fatigue crack propagation behavior at the microscale of 925A steel at low temperatures was described using fracture morphology. The experimental data can provide reference for the design of polar ships to further resist low-temperature fatigue and cold brittle fracture.

Coupling life prediction of bending very high cycle fatigue of completion strings made of different materials using deep wise separable convolution

AbstractThis article predicts bending very high cycle fatigue (VHCF) life of three typical nickel‐based alloys SM2550, BG2532, and G3 used for completion strings. Fatigue tests were conducted on the three alloys using an ultrasonic fatigue system at a frequency of 20 kHz. The results showed that the fatigue strength ranges of the three alloys were markedly different, reflecting their different sensitivities to fatigue loading. Scanning electron microscope observations revealed numerous fatigue crack origins with internal decohesion in the fatigue source region. To achieve unified prediction of the fatigue life for the three alloys, a prediction model based on deep learning was built with inputs including fatigue initiation quantity, cleavage facet size, and other fatigue fracture characteristics. It was found that single source feature was insufficient to obtain satisfactory prediction accuracy for all alloys, while multifeature coupling integration could significantly improve the prediction precision, enabling reliable prediction of alloy fatigue life. This study provides new insights into bending VHCF life prediction.

Experimental investigation of dynamic bond behaviors between LRS-FRP and concrete

The dynamic bonding behaviour at the interface between a large-rupture-strain fibre-reinforced polymer (LRS-FRP) and concrete was investigated via drop weight impact tests of notched beam specimens. The main experimental variables included the concrete strength grade, number of LRS-FRP layers, and loading rate. With increasing loading rate, the location of the peeling damage at the interface between the LRS-FRP and concrete shifted from the interior of the concrete layer to the concrete–binder layer interface, binder layer, and even binder layer–FRP interface. The ultimate debonding load of the LRS-FRP strips increased with increasing strain rate, reaching more than 1.7 times the static value at a strain rate of approximately 4/s, while the effective bond length did not show a clear increasing or decreasing tendency with increasing strain rate. For the local bond-slip relationship, both the peak interfacial bond stress and interfacial fracture energy increased with increasing strain rate, and the influences of the concrete strength and number of FRP layers on the strain rate sensitivity were insignificant. Based on the experimental results, improved models to predict the ultimate debonding load and effective bond length at the LRS-FRP–concrete interface under both static and dynamic loading conditions were proposed. Furthermore, dynamic increase factor (DIF) formulas for the peak interfacial bond stress and interfacial fracture energy for bond-slip modelling of the interface between a polyethylene naphthalate (PEN)-FRP and concrete were established.

Stress fracture of the first rib in a hockey goalie.

First rib stress fractures are uncommon in athletes and diagnosis requires a high degree of clinical suspicion. Diagnostic delay may increase risk of poor healing and long-term complications. Case reports and series describe these injuries primarily in overhead athletes; proposed contributing factors include anatomic susceptibility to stress and repetitive opposing muscular forces. We describe an ice hockey goalie with acute-on-chronic thoracic back pain who was found to have a first rib stress fracture, which to our knowledge is the first reported in this sport. We hypothesize that biomechanical stress from new stick positioning contributed to the injury. Our patient recovered symptomatically with conservative treatment; however, imaging suggested nonunion of the fracture site and possible pseudoarthrosis.

Fatigue Behavior and Fracture Surface Analysis of Corroded High-Strength Bridge Cable Wires

Bridge cable wires suffer from alternating stress and environmental erosion, leading to premature failure prior to its design life. This paper investigates the fatigue and mechanical behaviors of corroded bridge cable wires with a zinc–aluminum (Zn-Al) alloy coating. Based on the salt spray corrosion test and microstructure analysis, the anti-corrosion resistance and corrosion appearance characteristics of the Zn-Al alloy coating and galvanized coating were investigated. The Zn-Al alloy coating was superior in resistance to corrosion fatigue for the improvement in toughness and the generation of anti-corrosion Zn-Al and Fe-Zn-Al phases. Equations of the accelerated corrosion depth of the steel wires had been regressed to roughly estimate the corrosion life of the Zn-Al alloy coating, which can reach 29.1 years with a thickness of 70 μm. The fatigue and mechanical properties of the bare wires after the salt spray test were further studied based on tensile tests and fatigue tests. The fatigue properties of the bridge cable wire would decrease with the corrosion degree due to the deterioration and embrittlement of materials, where ductility characterized by the elongation rate was the most affected. Fracture surfaces of the wires were captured and analyzed based on a method for recognizing graphical contours. Insufficient fatigue life may occur in the steel wires after corrosion and increase with the degree of corrosion. The pit depth logarithmically weakened the fatigue life of steel wires for the weakening of fatigue toughness and the bearing area. The flat fracture was more common with a single fatigue source, while multiple fatigue sources led to step-like fractures for the generation of multiple dispersed crack propagation regions. Corrosion fatigue was more sensitive to the existence of fatigue sources than the reduction. Multiple initiation sources significantly reduced the fatigue life due to the cracking facilitation of the joint effect of multiple pits. The electrochemical reactions of corrosion can lead to material embrittlement and a reducing effect on the fracture toughness of the steel wires.

Flexural behavior of reinforced concrete beams strengthened with gradually prestressed near surface mounted carbon fiber-reinforced polymer strips under static and fatigue loading

The near surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strengthening technique, combined with gradually anchored prestressed technique, is utilized to delay the occurrence of concrete cover separation (CCS) and enhance the ductility of reinforced concrete beams. The load-carrying capacity of fully prestressed beams and gradually prestressed beams are investigated under both static and fatigue loading conditions. The study focused on the effect of gradient prestress on flexural behavior of strengthened beams, analyzed the failure mode, characteristic load, ductility, and stress distribution at CFRP-concrete interface under both prestress and load conditions. Results indicate that gradually prestressed beams outperform fully prestressed ones in restraining crack development, delaying yield of tensile reinforcement, improving bearing capacity and avoiding CCS failure. Bearing capacity was significantly increased by up to 35.48%, while ductility was greatly improved by 100.33% with ultimate deflection for gradually prestressed beams compared to fully prestressed ones. The fatigue life of gradually prestressed beams, which experienced a transition from CCS failure mode to fatigue fracture of tensile reinforcement, was significantly extended. Additionally, their ductility at failure was also greatly enhanced, thus confirming the effectiveness of gradually prestressed NSM CFRP strengthening technique.

Study on Plastic Constitutive Relation and Ductile Fracture Criterion of AM60B Magnesium Alloy.

It is currently a challenge to accurately predict the deformation and fracture behavior of metal parts in automobile crashes. Many studies have shown that the deformation and fracture behavior of materials are significantly affected by the stress state during automobile crashes with complex stress state characteristics. In order to further promote the application of die-cast magnesium alloys in automobiles, it is particularly important to study the material deformation and fracture behavior of die-cast magnesium alloys. In this paper, the mechanical properties of the AM60B die-cast magnesium alloy sheet under four stress states (shear, tension, R10 notch tension, and cupping) were designed and tested. Based on the von Mises isotropic constitutive model and Swift weighted Hockett-Sherby hardening model, the plastic constitutive model of die-cast magnesium alloy was established. Based on the plastic model and the fracture model (JC, MMC, and DIEM) considering the influence of three stress states, the deformation and fracture behavior of the AM60B die-cast magnesium alloy front-end members in three-point bending were predicted by experiments and finite element simulation. The experimental results show that the deformation mode and loading-displacement curve trend of the AM60B die-cast magnesium alloy front members are the same, the crack initiation point and crack initiation time are the same, and the crack shape is similar. The results show that the complex stress state constitutive model parameters and the DIEM fracture model obtained in this paper can accurately predict the deformation and fracture failure behavior of the AM60B die-cast magnesium alloy sheet.

Two scale models for fracture behaviours of cementitious materials subjected to static and cyclic loadings

This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the microscopic model of the ITZ through micro-cantilever bending tests. Subsequently, this validated ITZ model serves as a constitutive law to simulate the fracture behavior of mortar at the mesoscale using an uncoupled upscaling method. The influence of microstructural features, such as w/c ratio and microscopic roughness, on the fracture behaviour of ITZ is investigated. Moreover, the effect of ITZ properties and stress level on the fracture performance and fatigue damage evolution of mortar is also studied. The simulation results for both the ITZ and mortar demonstrate good agreement with experimental results. The proposed two models provide insights into the fracture mechanisms and fatigue damage evolution in cementitious materials subjected to static and cyclic loadings.

The 3-component mixture of power distributions under Bayesian paradigm with application of life span of fatigue fracture

Mixture distributions are naturally extra attractive to model the heterogeneous environment of processes in reliability analysis than simple probability models. This focus of the study is to develop and Bayesian inference on the 3-component mixture of power distributions. Under symmetric and asymmetric loss functions, the Bayes estimators and posterior risk using priors are derived. The presentation of Bayes estimators for various sample sizes and test termination time (a fact of time after that test is terminated) is examined in this article. To assess the performance of Bayes estimators in terms of posterior risks, a Monte Carlo simulation along with real data study is presented.

Relationship between weld rip diameter and fatigue fracture mode for friction stir spot welded tension‐peel joints

AbstractIn this study, the effects of variations in the weld rip diameter on fatigue properties were investigated based on the fatigue fracture mechanism using tensile peeling‐type friction stir spot welding (FSSW) joints. The results of the fatigue test showed that the high and low applied force ranges exhibited base metal fracture and weld area fracture, respectively, and the difference in the weld rip diameter hardly affected the fatigue life. In contrast, in the middle‐applied force range, the fracture morphology changes as the weld rip diameter decreases, and it is apparent that joints exhibiting weld area fracture decrease the fatigue life. The fatigue fracture morphology of the tensile peeling‐type FSSW joints can be described by a competing risk model between the weld rip diameter. Increasing the heat input during joining, thereby increasing the crack propagation resistance at the pressure fusion interface, can suppress weld area fracture.

Stress Fractures and Overuse Injuries in Children and Adolescents

There is an intricate connection between physical activity, bone health, and the susceptibility to stress fractures and overuse injuries. Physical activity has a positive impact on bone strength while a sedentary lifestyle can lead to a heightened risk for injury. The rise of early sports specialization has led to a substantial increase in overuse injuries, particularly in individual sports.Bone Stress Injuries (BSI) represent a category of overuse injuries closely linked to single sport specialization. BSI involves a spectrum of altered bone mechanics, ranging from edema of periosteum, endosteum, and bone; potentially leading to partial or full cortical breaks. This condition is prevalent in high-level athletes and encompasses stress reactions and fractures, resulting from an imbalance between injury creation and repair. Up to 20% of adolescents are affected, with the tibia being the most common location, predominantly occurring in athletes aged 15-25. A holistic approach integrating both physical and nutritional aspects is warranted to ensure sustained musculoskeletal health across diverse pediatric and adolescent groups and athletic endeavors. Key Concepts1.Early and single sports specialization has a substantial impact on overuse injuries.2.Bone stress injuries are common in high level athletes resulting from an imbalance between creation and repair of injury.3.Relative energy deficiency in sports (REDS) is related to a higher risk for recurrent Bone Stress Injuries.4.Athletes that are lacking Vitamin D are found to have an increased risk for stress fractures.

Biologic Therapies in Stress Fractures: Current Concepts

Stress fractures, a common overuse injury in physically active individuals, present a significant challenge for athletes and military personnel. Patients who sustain stress fractures have demanding training regimes, where periods of rest and immobilisation have unacceptable negative consequences on sport goals and finances. Aside from being an overuse injury, there are various contributing risk factors that put certain individuals at risk of a stress fracture. The main two being nutritional deficiencies and hormonal variations which have significant effects on bone metabolism and turnover. Historically, treatment of stress fractures focused on conservative strategies such as rest and immobilisation. Calcium and vitamin D deficiencies have been closely linked to stress fractures and so over time supplementation has also played a role in treatment. With the introduction of biologics into orthopaedics, newer treatment strategies have been applied accelerate fracture healing and perhaps improve fracture callus quality. If such therapies can reduce, time spent away from sport and activity, it would be ideal for treating stress fractures. This article aims to offers insights into the evolving landscape of stress fracture management. It investigates the pre-clinical evidence and available published clinical applications. Though fracture healing is well understood, the role of biologics for fracture healing is still indeterminate. Available literature for the use of biologics therapies in stress fractures is restricted and most reports have used biologics as a supplement to surgical fixation in subjects in studies that lack control groups. Randomised control trials have been proposed and registered by a few groups with results awaited. Assessing individuals for risk factors, addressing hormonal imbalances and nutritional deficiencies seem an effective approach to addressing the burden of stress fractures. We await better designed trials and studies to accurately determine the clinical benefit of adding biologics to management of these injuries.

Comparative Analysis of Stereotactic Radiation Therapy and Conventional Radiation Therapy in Cancer Pain Control: A Systematic Review and Meta-Analysis

BackgroundApproximately 55% of patients diagnosed with primary or metastatic cancer endure pain directly attributable to the disease. Consequently, it becomes imperative to address pain management through a comparative analysis of stereotactic radiotherapy (SRT) and conventional radiation therapy (CRT), especially in light of the less efficacious improvement achieved solely through pharmacological interventions. MethodsA systematic exploration was undertaken on PubMed, the Cochrane Library, and Elsevier’s ScienceDirect databases to identify studies that compare Stereotactic Radiotherapy to Conventional radiation therapy for pain management in individuals with metastatic bone cancer. The analyses were executed utilizing the random-effects model. ResultsA cohort of 1152 participants with metastatic bone cancer was analyzed, demonstrating significantly higher complete pain relief in the Stereotactic Radiotherapy group during both early and late follow-up (RR: 1.61; 95% CI: 1.17, 2.23, p-value: 0.004; I2: 0%). Stereotactic Radiotherapy also showed a non-significant increase in the incidence of partial pain relief (RR: 1.07; 95% CI: 0.85, 1.34, p-value: 0.56; I2: 18%). Furthermore, Stereotactic Radiotherapy was associated with a significantly reduced risk of stationary pain throughout follow-up (RR: 0.61; 95%CI: 0.48, 0.76, p-value: < 0.0001; I2: 0. The incidence of progressive pain was non-significantly reduced with Stereotactic Radiotherapy during both early and late follow-up (RR: 0.77; 95% CI: 0.50, 1.17, p-value: 0.22; I2: 0%). Secondary outcomes exhibited a non-significant trend favoring Stereotactic Radiotherapy for dysphagia, esophagitis, pain, and radiodermatitis, while a non-significant increase was observed for nausea, fatigue, and vertebral compression fracture. ConclusionIn summary, stereotactic radiation therapy (SRT) has improved in achieving complete pain relief while exhibiting a decreased probability of delivering stationary pain compared to conventional radiation therapy (CRT). Nevertheless, it is crucial in future research to address a noteworthy limitation, specifically, the risk of vertebral compression fracture.

The Heel Complex: Anatomy, Imaging, Pathologic Conditions, and Treatment.

The differential diagnosis for heel pain is broad but primarily involves abnormalities of the Achilles tendon, calcaneus, and plantar fascia. Achilles tendon disorders include tendinosis, tendinitis, and partial or complete tears. Tendinosis refers to tendon degeneration, while tendinitis is inflammation after acute overload. Untreated tendinosis can progress to partial or complete tears. Tendon disorders can be accompanied by paratenonitis or inflammation of the loose sheath enclosing the tendon. Initial management involves rehabilitation and image-guided procedures. Operative management is reserved for tendon tears and includes direct repair, tendon transfer, and graft reconstruction. The calcaneus is the most commonly fractured tarsal bone. The majority of fractures are intra-articular; extra-articular fractures, stress or insufficiency fractures, medial process avulsion, and neuropathic avulsion can also occur. Posterosuperior calcaneal exostosis or Haglund deformity, retrocalcaneal bursitis, and insertional Achilles tendinosis form the characteristic triad of Haglund syndrome. It is initially managed with orthotics and physiotherapy. Operative management aims to correct osseous or soft-tissue derangements. The plantar fascia is a strong fibrous tissue that invests the sole of the foot and contributes to midfoot stability. Inflammation or plantar fasciitis is the most common cause of heel pain and can be related to overuse or mechanical causes. Acute rupture is less common but can occur in preexisting plantar fasciitis. Conservative treatment includes footwear modification, calf stretches, and percutaneous procedures. The main operative treatment is plantar fasciotomy. Plantar fibromatosis is a benign fibroblastic proliferation within the fascia that can be locally aggressive and is prone to recurrence. ©RSNA, 2024 Test Your Knowledge questions for this article are available in the supplemental material.

A multi-scale experimental investigation on fatigue crack propagation rate behavior of powder bed fusion-laser beam 316L stainless steel subjected to various heat treatments

In this study, three heat treatments referred to as heat treatment 1 (HT1), HT2, and HT3 were applied to tune the microstructure of powder bed fusion-laser beam (PBF-LB) 316L stainless steel. Furthermore, the fatigue crack propagation rate (FCPR) of as-built PBF-LB 316L specimens and specimens subjected to the three aforementioned heat treatments was thoroughly investigated. To this end, the FCPR was evaluated by a fatigue testing machine combined with an infrared thermal camera, and the Paris law was established to quantitatively assess the FCPR of PBF-LB 316L. In addition, a systematic investigation of microstructural evolution, residual stress, tensile properties, and fatigue crack propagation (FCP) fracture surfaces as well as their effect on the FCPR in function of various heat treatments were carried out. The results indicate that the release of residual stresses, the annihilation of the cellular structure, and the occurrence of recrystallization are obtained through the application of HT1, HT2, and HT3 respectively. Furthermore, it is shown that although all three heat treatments can improve the FCPR behavior of PBF-LB 316L to some extent, HT3 PBF-LB 316L presents the lowest FCPR mainly due to its most pronounced plasticity-induced crack closure effect, indicating its highest resistance to FCP even though the recrystallization obtained by HT3 results in the lowest yield strength (YS). Finally, some recommendations about adequate heat treatments concerning fatigue life are suggested.

The effect of κ-carbides on high cycle fatigue behavior of a Fe-Mn-Al-C lightweight steel

Numerous studies have demonstrated the viability of lightweight Fe-Mn-Al-C steels for exhibiting an improved balance of high strength and high ductility in automotive applications. However, their high-cycle fatigue behaviour has been scarcely studied. This work examines the effect of κ-carbides formed during the aging treatment on the high-cycle fatigue performance of an austenitic Fe-29Mn-8.7Al-1C (wt. %) steel. The material is studied in solution-treated, under-aged, and peak-aged conditions. High-cycle fatigue tests and analysis of fatigue fracture surfaces were performed using SEM and EBSD techniques. The results indicate satisfactory high-cycle fatigue performance in the aged material, somewhat better than for high Mn steels. Fatigue crack formation and growth occur predominantly via a quasi-cleavage mechanism along the [1 1 1] crystallographic planes, which is also a plane for planar glide and the formation of persistent slip bands during plastic deformation. The nanoscale intragranular κ-carbides in the aged samples interact with the gliding dislocations, resulting in the shearing of nanoscale κ-carbides in a weakly coupled regime. The resistance of particles to shearing is determined by their size, volume fraction, and antiphase boundary energy (γAPB), which vary during the aging process. The aged Fe-29Mn-8.7Al-1C steel significantly improves the fatigue strength as the formation of persistent slip bands is delayed due to an additional energy barrier related to the shearing of the κ-carbides. This improvement peaks in the under-aged condition and decreases with further aging time.

High-throughput experimental method for measuring fatigue crack growth rate curve of soft materials

The fatigue properties of soft materials, including fatigue crack initiation and propagation, fatigue life and threshold, have been a significant concern in the past few decades. Measuring the fatigue crack growth rate (FCGR) curve is a standard method to characterize fatigue fracture and has been extensively studied in the literature. Conventional methods employing a pure shear configuration measure only one data point on the FCGR curve per test run. Thus, obtaining the whole FCGR curve with numerous data points becomes excessively time-consuming. This work proposes a high-throughput experimental method for measuring the FCGR curve of soft materials. We prepare ten thermoplastic polyurethane (TPU) specimens in single edge notch tensile configuration with different precut crack lengths, use a mechanical mechanism to apply the same cyclic loads to the ten specimens simultaneously, and identify the crack growth of each specimen by image processing. The proposed high-throughput experimental method enables the measurement of over 90 data points on the FCGR curve in a single test run, facilitating the acquisition of the entire curve with just two runs. The obtained FCGR curve exhibits a linear relationship within its middle region on double logarithmic coordinates. The proposed method is further applied to study the effect of temperature on the FCGR curve of TPU specimens. The current experimental setup can be further optimized to accommodate a wider range of soft materials with diverse mechanical properties and specific loading conditions.

Anatomy of the Naviculocuneiform Joint Complex.

The purpose of this study was to quantify the articular surfaces of the naviculocuneiform (NC) joint to help clinicians better understand common pathologies observed such as navicular stress fractures and arthrodesis nonunions. Twenty cadaver NC joints were dissected and the articular cartilage of the navicular, medial, middle, and lateral cuneiforms were quantified by calibrated digital imaging software. Statistical analysis included calculating the mean cartilage surface area dimensions of the distal navicular and proximal cuneiform bones. Length measurements on the navicular were obtained to estimate the geographic location of the interfacet ridges. Lastly, all facets of the articular surfaces were described in regard to the shape and location of cartilaginous or fibrous components. Results were compared using Student t tests. Navicular cartilage was present over 75.4% of the surface area of the proximal NC joint, compared with 72.6% of combined cuneiform cartilage distally. The mean height of the deepest (dorsal-plantar) measurement of navicular articular cartilage was 18 ± 3 mm. The mean heights of the distal medial, middle, and lateral cuneiform articular facets were 15 ± 1 mm, 17 ± 2 mm, and 15 ± 2 mm, respectively. There is significant variation among the articular surfaces of the NC joint. Additionally, the central third of the navicular was calculated to lie in the inter-facet ridge between the medial and middle articular facets of the navicular. Surgeons may consider this study data when performing joint preparation for NC arthrodesis as cartilage was present to a mean depth of 18 mm at the NC joint. Additionally, this study demonstrates that the central third of the navicular, where most navicular stress fractures occur, lies in the interfacet ridge between the medial and middle articular facets of the navicular.

The Influence of Component Design and Positioning on Soft-Tissue Tensioning and Complications in Reverse Total Shoulder Arthroplasty: A Review.

» Reverse total shoulder arthroplasty was designed to function in the rotator cuff deficient shoulder by adjusting the glenohumeral center of rotation (COR) to maximize deltoid function.» Adjustments in the COR ultimately lead to changes in resting tension of the deltoid and remaining rotator cuff, which can affect implant stability and risk of stress fracture.» Soft-tissue balance and complication profiles can be affected by humeral component (version, neck shaft angle, and inlay vs. onlay) and glenoid component (sagittal placement, version, inclination, and lateralization) design and application.» A good understanding of the effects on soft-tissue balance and complication profile is critical for surgeons to best provide optimal patient outcomes.

The Importance of bone health for pediatric Athletes: from Juvenile Osteochondral Injury to Relative Energy Deficiency in Sports

Vitamin D is pivotal for bone health, muscle strength, recovery, and overall athletic performance. This article discusses the effects of Vitamin D deficiency among athletes, with a specific focus on its connection to sports-related conditions like Relative Energy Deficiency in Sport (RED-S) and Juvenile Osteochondritis Dissecans (JOCD). Additionally, we review the importance of vitamin D for muscle strength and muscle repair. Vitamin D deficiency exacerbates the risk of stress fractures in RED-S patients due to its impact on bone biology. Research points to an increased incidence of vitamin D deficiency in JOCD patients, indicating a potential connection between the condition and low Vitamin D levels. Children and athletes should be screened for vitamin D deficiency as supplementation has been found to have positive outcomes. This article underscores the pivotal role of Vitamin D in athletic performance. Further research is essential to elucidate how Vitamin D deficiency contributes to sports-related pathologies and to establish the optimal Vitamin D levels for injury prevention in athletes.